Saturday, December 24, 2011

ISO 9001 Standard - ISO 9001:2008 Standards



Read more on ISO 9001 Standard at http://www.iso9001store.com

Sunday, June 27, 2010

About ISO 14001:2004 Standards

The ISO 14001 aims to reduce the environmental carbon footprints that many businesses leave behind today because of not taking the right steps to be environmental sustainable. This standard promotes the decrease in the waste of necessary business resources and also reduces the pollution that can sometimes be a by product of a business.

About ISO 14001

The most updated version of the ISO 14001 was released in the year 2004 by the International Organisation of Standardization (ISO), which was attended by members from all the committees from around the world. In order for a company to be awarded the ISO 14001 standard certificate, an external auditor has to audit the company by an audit body that has been accredited by an accreditation body. The certification auditors are required to be accredited by the International Registrar of Certification Auditor and the certification body has to be accredited by the Registrar Accreditation Board in the USA or by the National Accreditation Board in Ireland.

The structure of ISO 14001 is very much like the ISO 9000, which is management standard, so these two standards can be implemented side by side to achieve the best results. As a part of the ISO 14000 family, which deals with different aspects of environmental issues, ISO 14001:2004 and ISO 14002 deal with environmental management system (EMS). ISO 14001 gives the requirements for the

EMS and ISO 14002 gives the basic guidelines for EMS.

Environmental Management System with ISO 14001:2004

The EMS, as per the requirements of the ISO 14001, enables the company, may it be of any size, location and income to:

  • It helps the company improve its environmental strategy and this positively affects their environmental performance.
  • It helps in identifying and controlling the environmental impact that the activities, services or products of the company might have.
  • And it helps in carrying out a systematic approach to set environmental targets and objectives, to achieve these and also to demonstrate that they have been achieved.

How does it work?

ISO 14001 does not specify or chalk out a definite level that each business has to reach. If the performance was determined, then it would have to be done for every specific business. But that is not how it works and has a very different approach, like:

  • The ISO has various standards dealing with environmental issues. ISO 14001 deals with a framework provided for a strategic and holistic approach to the businesses environmental policy, actions and plans.
  • It gives the general requirements for the EMS.
  • This also states the reference to the communication requirements for the communication of the environmental management issues between the company, stakeholders, the public and the regulators.
  • As these standards are not company specific, any and every business can undertake them as long as they are dedicated to the continued and improved environmental performance and they have a commitment to comply with the set norms.

Wednesday, May 5, 2010

ISO 9001 Standards & ISO 14001 Standards

In order to assist organizations to have a full understanding of the new ISO 9001:2008, it may be useful to have an insight on the revision process, how this revision reflects the inputs received from users of the standard, and the consideration given to benefits and impacts during its development.

Prior to the commencement of a revision (or amendment) to a management system standard, ISO/Guide 72:2001 Guidelines for the justification and development of management system standards recommends that a “Justification Study” is prepared to present a case for the proposed project and that it outlines details of the data and inputs used to support its arguments. In relation to the development of ISO 9001:2008 user needs were identified from the following:

-the results of a formal “Systematic Review” on ISO 9001:2000 that was performed by the members of ISO/TC 176/SC2 during 2003-2004
-feedback from the ISO/TC 176/Working Group on “Interpretations”
-the results of an extensive worldwide “User Feedback Survey on ISO 9001 and
The Justification Study identified the need for an amendment, provided that the impact on users would be limited and that changes would only be introduced when there were clear benefits to users.

The key focuses of the ISO 9001:2008 amendment were to enhance the clarity of ISO 9001:2000 and to enhance its compatibility with ISO 14001:2004.

A tool for assessing the impacts versus benefits for proposed changes was created to assist the drafters of the amendment in deciding which changes should be included, and to assist in the verification of drafts against the identified user needs. The following decision making principles were applied:

1) No changes with high impact would be incorporated into the standard;

2) Changes with medium impact would only be incorporated when they provided a correspondingly medium or high benefit to users of the standard;

3) Even where a change was low impact, it had to be justified by the benefits it delivered to users, before being incorporated.

The changes incorporated in this ISO 9001:2008 edition were classified in terms of impact into the following categories:

-No changes or minimum changes on user documents, including records

-No changes or minimum changes to existing processes of the organization

-No additional training required or minimal training required

-No effects on current certifications

The benefits identified for the ISO 9001:2008 edition fall into the following categories:

-Provides clarity

-Increases compatibility with ISO 14001.

-Maintains consistency with ISO 9000 family of standards.

-Improves translatability.

Monday, April 5, 2010

ISO 14001 Standards - Environmental Management System

ISO 14001 Standards - Environmental Management System

ISO 14001 is in fact a series of international standards on environmental management. It provides a framework for the development of an environmental management system[/url] and the supporting audit programme.
The ISO 14001 series emerged primarily as a result of the Uruguay round of the GATT negotiations and the Rio Summit on the Environment held in 1992. While GATT concentrates on the need to reduce non-tariff barriers to trade, the Rio Summit generated a commitment to protection of the environment across the world.

After the rapid acceptance of ISO 9000, and the increase of environmental standards around the world, the International Standards Organisation (ISO) assessed the need for international environmental management standards. They formed the Strategic Advisory Group on the Environment (SAGE) in 1991, to consider whether such standards could serve to:

Promote a common approach to environmental management similar to quality management;
Enhance organizations ability to attain and measure improvements in environmental performance; and
Facilitate trade and remove trade barriers.
In 1992, SAGEs recommendations created a new committee, TC 207, for international environmental management standards. This committee and its sub-committees included representatives from industry, standards organizations, government and environmental organizations from many countries. What developed was a series of ISO14001 standards designed to cover:

-environmental management systems
-environmental auditing
-environmental performance evaluation
-environmental labelling
-life-cycle assessment
-environmental aspects in product standards

ISO 14001 was first published as a standard in 1996 and it specifies the actual requirements for an environmental management system. It applies to those environmental aspects over which an organization has control and where it can be expected to have an influence.

ISO 14001 is often seen as the corner-stone standard of the ISO 14000 series. It specifies a framework of control for an Environmental Management System and is the only ISO 14000 standard against which it is currently possible to be certified by an external certification body. However, it does not in itself state specific environmental performance criteria.

Saturday, January 16, 2010

Evaluation of Compliance In ISO 14001 Standards

Evaluation of Compliance In ISO 14001 Standards

The requirement to establish a procedure for periodically evaluating compliance with applicable legal and other requirements falls short of specifically requiring regulatory compliance audits but, in fact, a system of regular regulatory compliance audits may be the most practical means for meeting this requirement of the standard. In the U.S., determination of whether to conduct a compliance audit will be governed in part by the particular jurisdictions approach to allowing a legal privilege for the self-assessment audit.
Evaluation vs. Audit The difference between an evaluation and audit can only be determined by looking outside of ISO 14001. Consulting a dictionary reveals that an evaluation involves a determination of value or worth and that an audit is an examination of accounts done by persons appointed for the purpose. A better definition `is the more specific ISO 19011:2002, Guidelines for Quality and/or Environmental Management Systems Auditing, which defines an audit as a systematic, independent, and documented process for obtaining audit evidence and evaluating it objectively to determine the extent to which the audit criteria are fulfilled. Many organizations do not have a system for evaluating regulatory compliance other than their own records and the inspections of regulatory officials. This lack of a verification system can be a risky way to operate. Reports of enforcement actions and consent agreements show that many organizations are blindsided by rogue employees who violate rules and falsify documents to cover up environmental misdeeds. Although ISO 14001 does not prescribe a specific approach to evaluation of regulatory compliance, organizations should consider methods for going beyond verification of records by collecting and evaluating physical evidence.

What Is Environmental Management System?

ISO 14000 is primarily concerned with Environmental Management. In plain language, this means what the organization does to minimize harmful effects on the environment caused by its activities.

Improving the environmental performance of corporations is one way of limiting environmental damage. Environmental management systems (EMS's), such as ISO 14001, provide a framework for organizations that wish to effectively manage their environmental affairs. Implementing an EMS that conforms to the ISO 14001 standard may help businesses integrate environmental values into their operations.

An EMS can be described as a program of continuous environmental improvement that follows a defined sequence of steps drawn from established project management practice and routinely applied in business management. In simple terms these steps are
as follows:
• Review the environmental consequences of the operations.
• Define a set of policies and objectives for environmental performance.
• Establish an action plan to achieve the objectives.
• Monitor performance against these objectives.
• Report the results appropriately.
• Review the system and the outcomes and strive for continuous improvement.
Not every system will present these steps in exactly the same way, but the basic principles are clear and easily understandable.

The ISO 14000 series is a series of standards for different aspects of environmental management. A number of these standards relating to environmental management systems have been adopted formally by the members of the ISO, while others are in different stages of preparation.

ISO 14000 is a group of standards covering the following areas:
•Environmental Management Systems (14001,14002, 14004)
•Environmental Auditing (14010, 14011, 14012)
•Evaluation of Environmental Performance (14031)
•Environmental Labeling (14020, 14021, 14022, 14023, 14024, 14025)
•Life-Cycle Assessment (14040, 14041,14042, 14043)

Friday, October 9, 2009

Records required by ISO 9001:2008

Records required by ISO 9001:2008

Clause Record required
5.6.1 Management reviews
6.2.2 e) Education, training, skills and experience
7.1 d) Evidence that the realization processes and resulting product fulfil requirements
7.2.2 Results of the review of requirements related to the product and actions arising from the review
7.3.2 Design and development inputs relating to product requirements
7.3.4 Results of design and development reviews and any necessary actions
7.3.5 Results of design and development verification and any necessary actions
7.3.6 Results of design and development validation and any necessary actions
7.3.7 Results of the review of design and development changes and any necessary actions
7.4.1 Results of supplier evaluations and any necessary actions arising from the evaluations
7.5.2 d) As required by the organization to demonstrate the validation of processes where the resulting output cannot be verified by subsequent monitoring or measurement
7.5.3 The unique identification of the product, where traceability is a requirement
7.5.4 Customer property that is lost, damaged or otherwise found to be unsuitable for use
7.6 a) Basis used for calibration or verification of measuring equipment where no international or national measurement standards exist
7.6 Validity of the previous measuring results when the measuring equipment is found not to conform to requirements
7.6 Results of calibration and verification of measuring equipment
8.2.2 Internal audit results and follow-up actions
8.2.4 Indication of the person(s) authorizing release of product.
8.3 Nature of the product nonconformities and any subsequent actions taken, including concessions obtained
8.5.2 e) Results of corrective action
8.5.3 d) Results of preventive action